Skype
hualianpm
Position adjustment of the blister and the edge of the medicine board of the blister packaging machine
The position adjustment of the blister and the edge of the medicine board of the blister packaging machine board:
(1) The black screw next to the punching station can adjust the front and rear position of the medicine board. Before adjustment, the M6 fastening screw behind the cutting station should be slightly loosened, and then tightened after adjustment to ensure that the punching station does not tilt without gaps with the substrate. Also note whether the direction of adjustment will tighten or break the timing belt.
(2) The guide plate on the front side of the punching station can adjust the position of the left and right sides of the medicine plate, but it should be adjusted slightly if the size is as close as possible.
(3) If there are special circumstances, you can adjust the position inside and outside the punching knife (try not to make this adjustment).
(1) The black screw next to the punching station can adjust the front and rear position of the medicine board. Before adjustment, the M6 fastening screw behind the cutting station should be slightly loosened, and then tightened after adjustment to ensure that the punching station does not tilt without gaps with the substrate. Also note whether the direction of adjustment will tighten or break the timing belt.
(2) The guide plate on the front side of the punching station can adjust the position of the left and right sides of the medicine plate, but it should be adjusted slightly if the size is as close as possible.
(3) If there are special circumstances, you can adjust the position inside and outside the punching knife (try not to make this adjustment).
Recommended blister packaging machine products:
Patent No : ZL2012 2 0653459.8 ZL2012 3 0595907.9 High-speed Blister Packing Machine is suitable for automatic high speed alu pvc packing of capsules, tablets and chewing gums, candies. It adopts flat pressure forming to form strong and average blisters. and roller type mesh sealing to ensure reliable sealing. The machine is equipped with batching system, embossing device and horizontal boundless punching to achieve high production capacity and greatly save packing material Technical characters： Fast mould chang, push-oriented, without using tools. Adopt servo traction, simple to set up, convenient to debug. Push-oriented punch mould installation. If inspection and reject system is equipped and changed, no need to dismantle suck discs. Long distance between two heating plates of forming when machine stops. to avoid PVC to be excessively heated and softened. Optional configurations include camera inspection and rejection device, mechanical hand structure with .......
High-speed Tropical Aluminum Blister Packing Machine adds forming and sealing process of tropical aluminum on the basis of DPH-270D, in order to improve the way of sealing, moisture proof, and light avoiding, to raise the value of the product. It is suitable for packing all kinds of products in pharma, healthcare industries. Technical characters Fast mould change, push oriented, without using tools. Adopt servo traction, simple to set up, convenient to debug. Push oriented punch way to install the mould. It's no need to dismantle the suck nozzles if equipped with inspection and rejection system. Long distance between two heating plates of forming when the machine stops, to avoid PVC excessively heated and softened. Optional configurations include camera inspection and rejection device, mechanical hand structure with suck heads, automatic vibration guide rail feeder, etc. Can be equipped with servo motor and eye mark register device. Main Technical Par.......