Skype
hualianpm
Technical requirements for routine maintenance of blister packaging machines (aluminum-plastic packaging machines)
The technical requirements for the daily maintenance of aluminum-plastic blister packaging machine are mainly divided into six major points.
(1) It is required to clean the aluminum-plastic packaging machine after the end of each shift. The cleaning part includes various movable parts as well as a lower anilox plate, a forming plate, a punching knife and the like.
(2) Oil injection per week - times, the oil is injected into each active part, the guide shaft of each station, the feed guide shaft punches four guide shafts, and the lower heating plate has four guide shafts. The oil is made of food grade special lubricant and calcium base grease (note that the synchronous toothed belt of the transmission part is forbidden to be filled with oil, and the sprocket part is filled with calcium base grease).
(3) Inspection once every three months, including checking whether the movable parts of the blister packaging machine are smooth and free from sticking, and checking whether the bearing is damaged, whether the mold is damaged or not, and whether the stacked reed is broken.
(4) Annual overhaul - - times, including the comprehensive overhaul of the aluminum-plastic blister packaging machine and the re-adjustment of the abnormal operation of the equipment. Replace the wearing parts, and the wearing parts are detailed in the equipment manual.
(5) The operation procedure is to ensure the normal operation of the equipment and increase the service life. It is a standardized and standardized process guide.
(6) Operating precautions:
1 During the operation of the equipment, the operator should try not to press and pull the PVC in operation, only when the PVC stops;
2 Do not pull the PVC at the guide wheel while the PVC is moving and stopping.
Then recommend several aluminum-plastic blister packaging machines for everyone:
https://www.hpm.ltd/Products/P-4.html
DPH-ZHJ400D high speed aluminum plastic blister packaging and automatic carton linkage production line
This machine is highly recommended, fully automatic blister pack, the most important thing is the speed! ! ! It can realize 600 plates per minute and can be stably queued and sent into the carton storage warehouse. The packing speed is ≤400 (box ctns/min).
Well, pay attention to Hualian Pharmaceutical Machine, share the blister packaging machine, aluminum plastic packaging machine, cartoning machine, and bag packaging machine articles every day, I hope you like it! ! !
(1) It is required to clean the aluminum-plastic packaging machine after the end of each shift. The cleaning part includes various movable parts as well as a lower anilox plate, a forming plate, a punching knife and the like.
(2) Oil injection per week - times, the oil is injected into each active part, the guide shaft of each station, the feed guide shaft punches four guide shafts, and the lower heating plate has four guide shafts. The oil is made of food grade special lubricant and calcium base grease (note that the synchronous toothed belt of the transmission part is forbidden to be filled with oil, and the sprocket part is filled with calcium base grease).
(3) Inspection once every three months, including checking whether the movable parts of the blister packaging machine are smooth and free from sticking, and checking whether the bearing is damaged, whether the mold is damaged or not, and whether the stacked reed is broken.
(4) Annual overhaul - - times, including the comprehensive overhaul of the aluminum-plastic blister packaging machine and the re-adjustment of the abnormal operation of the equipment. Replace the wearing parts, and the wearing parts are detailed in the equipment manual.
(5) The operation procedure is to ensure the normal operation of the equipment and increase the service life. It is a standardized and standardized process guide.
(6) Operating precautions:
1 During the operation of the equipment, the operator should try not to press and pull the PVC in operation, only when the PVC stops;
2 Do not pull the PVC at the guide wheel while the PVC is moving and stopping.
Then recommend several aluminum-plastic blister packaging machines for everyone:
https://www.hpm.ltd/Products/P-4.html
DPH-ZHJ400D high speed aluminum plastic blister packaging and automatic carton linkage production line
This machine is highly recommended, fully automatic blister pack, the most important thing is the speed! ! ! It can realize 600 plates per minute and can be stably queued and sent into the carton storage warehouse. The packing speed is ≤400 (box ctns/min).
Well, pay attention to Hualian Pharmaceutical Machine, share the blister packaging machine, aluminum plastic packaging machine, cartoning machine, and bag packaging machine articles every day, I hope you like it! ! !