(1) PVC
       1 Ensure that the PVC hard sheet is thin and even and meets the requirements of the industry without damage.
       2 Determine the width of the package and adjust the correct distance between the package and the substrate. See Note 2 for details.
       Install PVC according to the operation of the simulated disk PVC. When wearing PVC, ensure that the movement is smooth and free of jams, and ensure that the moving and fixing clips can be completely clamped to the correct position of the PVC. See Note 3 for details.
       3 PVC should be securely secured when it is wrapped in the waste collection station. The gap between the two plexiglass baffles and the waste end face is appropriate, and the distance between the end face of the plexiglass baffle and the substrate is correct. See Note 4 for details.
       (2) Aluminum foil
       1 to ensure the thickness of aluminum foil and glue evenly, no damage, and meet the industry requirements.
       2 Determine the width of the package and adjust the correct distance between the package and the substrate. See Note 2 for details.

       3 Wear the aluminum foil according to the operation of the simulation disc. When wearing the aluminum foil, ensure that the movement is smooth and there is no stuck phenomenon, and the PVC is covered in parallel.