Cartoning Machine overview and parameter introduction

Overview of the fully automatic high speed cartoning machine:
The fully automatic high-speed cartoning machine is a device (synchronization and logic) that automatically completes the entire cartoning process by simulating the movement of the human hand.
The basic actions include the insertion of the medicine board into the box, the filling instructions, the sealing of the paper box, the batch number, etc., and a series of mechanical and electrical controls are automatically controlled by the PLC.
The basic components of the automatic high-speed cartoning machine include: medicine board transportation, medicine board loading station, manual workstation, lower box device, push box device, batch number device, sealing device, holding device, and reject device.

Cartoning machine parameters:
Model ZHJ-200 ZHJ-260 ZHJ-400
Production capacity (box / minute) ≤200 ≤240 ≤370
Maximum carton size (mm) 200×80×70 200×80×70 200×80×70
Minimum carton size (mm) 65×25×15 65×25×15 65×25×15
Carton quality 250-300/m2 250-300/m2 250-300/m2
Maximum specification size (length × width) 260 × 180 260 × 180 260 × 180
Minimum specification size (length × width) 110 × 100 110 × 100 110 × 100
Quality of the manual 55-65/m2 55-65/m2 55-65/m2
Air consumption ≥5m3/h ≥5m3/h ≥5m3/h
Total power 4.1kw 6.9kw 8.2kw
Power 380V 50HZ 380V 50HZ 380V 50HZ
Dimensions 4500×1500×1700 4500×1500×1700 4500×1500×1700


Medicine board transport
The structure and function of this part are relatively simple, mainly paying attention to the following aspects:
(1) The size of the “opening” of the color steel plate in the clean area and the non-clean area directly affects whether the medicine board can be smoothly and smoothly delivered in place.
(2) Whether the conveyor belt rotates smoothly.
(3) How to avoid artificially unintentionally pushing the conveyor belt.
(4) The speed at which the conveyor belt enters the lower feed port.
(5) Inlet detection (generally there are two detection switches).
1.2.3 medicine board cutting station
(1) The components of the medicine board blanking station include: medicine board library, material hook, motor and sheave, combined bracket, medicine board detection, etc.
(2) The medicine board blanking workstation is generally designed into two, one is the automatic feeding of the connection operation, and the other is the manual feeding.
(3) Working principle of cutting: The material is cut by alternate actions of four material hooks.
(4) Mechanical movement of the unloading: the rotation of the groove wheel is driven by the motor, and the groove wheel drives the linkage mechanism to alternately move the four distribution hooks, so that the medicine plate can be dropped into the designated position of the medicine conveyor belt in a free fall form.
(5) The key points of the unloading mechanism include: the sheave, the connecting rod, the position of the materializing hook, the synchronization (when the servo motor is started), and the fiber inspection.
Key control point content:
(1) The specified position of the medicine board conveyor belt.
(2) Synchronization.
(3) Whether there is a drug board test.
Copyright © Hualian Pharmaceutical Machinery

Skype

hualianpm