Preparation of the flat blister packaging machine before operation:
1. Check that the blister packaging machine should be in a "good" state;
2. Check the compressed air pressure ≥ 0.4Mpa;
3. Check that the mold is installed properly and matched;
4, blister packaging machine check: see the following figure

Flat blister packaging machine equipment operation steps:

The specific steps are shown in the figure below.

Blister packaging machine product recommendation: https://www.hlyj.com/Products/71/

Blister packaging machine product recommendation: https://www.hlyj.net/Products/71/

Blister Packing Machine   Cartoning Machine   Rotary Packing Machine   Tube Filling And Sealing Machine